Features
All
poles - Ash Hardwood
.
Boat
Poles with Aluminum or Galvanized Ball Point Hook
Boat
Poles
1 1/2" x 4'
1 1/2" x 6'
1 1/2" x 8'
1 1/2" x 10'
1 1/2" x 12'
1 1/2" x 16'
1 1/2" x 6'
1 1/2" x 8'
1 1/2" x 10'
1 1/2" x 12'
1 1/2" x 16'
1 1/4" x 12'
1 1/4" x 14'
1 3/8" x 16'
1 3/8" x 18'
1 1/4" x 14'
1 3/8" x 16'
1 3/8" x 18'
50 LBS.
56 LBS.
80 LBS.
90 LBS.
56 LBS.
80 LBS.
90 LBS.
LENGTH
WEIGHT
per 100 Pcs.
Round Rungs
Features
1"
Thick x 4 1/2" Wide x 70" Long Ash Hardwood
.
Spreader
grooved for non-skid surface
Features
1"
Thick x 4 1/2" Wide x 20 1/2" Long Ash Hardwood
.
Flat
Step grooved for non-skid surface
NOTE: Available in Synthetic (Ultra-Poly) with Non-Skid
surface for SOLAS Type Ladders.

4 1/2" x 20 1/2" Wood
4 1/2" x 70 1/2" Wood Spreader
4 1/2" x 20 1/2" Synthetic
4 1/2" x 70 1/2" Wood Spreader
4 1/2" x 20 1/2" Synthetic
DJM-I

MODEL
TYPE/SIZE
U.S.C.G.
Replacement Steps/Spreaders complete with clamps (all white)
DJM-II
4
1/2" x 20 1/2" Wood
4 1/2" x 70 1/2" Synthetic Spreader
4 1/2" x 70 1/2" Synthetic Spreader
ERIK-I
4
1/2" x 20 1/2" Wood
ERIK-II
4
1/2" x 20 1/2" Synthetic

Synthetic
Steps for Solas-Max Ladders
.
Attaches
to rope without re-rigging the ladder
Same
step & hardware used in U.S.C.G. Ladders (Though not approved as such)
.
International
Orange with non-skid surface
.
Boatswain's Seat

8"
x 24"
10"
x 24"
Constructed
of 1/8" steel plate, welded. Wood lined. Inside dimensions 24" long,
24" wide, 19" deep. Approximately 6 1/3 cubic feet. Chest primed and
finished with one coat of gray deck paint.
Weight 195 LBS.

Pyrotechnic
Chest

.
Material
- Poplar
.
Dipped
in Hot Wax
Minimum
order 6 PCS. Per Size
Tapered Wood Plug

Hand Fids
6"
x 1 3/8"
8" x 1 1/2"
10" x 1 1/2"
12" x 1 3/4"
14" x 1 3/4"
16" x 2"
18" x 2"
18" x 3"
20" x 2 1/4"
24" x 3"
8" x 1 1/2"
10" x 1 1/2"
12" x 1 3/4"
14" x 1 3/4"
16" x 2"
18" x 2"
18" x 3"
20" x 2 1/4"
24" x 3"
Sizes
Standing Fids
24"
x 4"
30" x 4"
36" x 6"
30" x 4"
36" x 6"
Sizes
Hearts for Flat Step Spreaders

Grooved
to Match Holes in Steps & Spreader
2"
Wide x 2 3/4" Long x 1 3/16" Thick
.
.
Boat Oars

Specifically Formulated Synthetics
Brilliant Nonfading Yellow Color
.
.
Tempered Aluminum Clad Shafts
No Maintenance
.
.
Sleeve Reinforced Black Grip
Sealed for Floatation
.
.
U.S.C.G. Accepted
.
8'
9'
10'
11'
12'
13'
14'
15'
16'
9'
10'
11'
12'
13'
14'
15'
16'
U.S.C.G. Regulation 94.20-15W
Oars, A unit, consisting of a complement of rowing oars and steering oar, shall be provided for each lifeboat in accordance with Table 94.20-15(W), except that motor-propelled and handpropelled lifeboats need only be equipped with four rowing and one steering oar, In any case, the emergency lifeboats shall be provided with the full compliment of oars prescribed by the table. All oars shall be buoyant.
Oars, A unit, consisting of a complement of rowing oars and steering oar, shall be provided for each lifeboat in accordance with Table 94.20-15(W), except that motor-propelled and handpropelled lifeboats need only be equipped with four rowing and one steering oar, In any case, the emergency lifeboats shall be provided with the full compliment of oars prescribed by the table. All oars shall be buoyant.
| Length of lifeboat, feet | Number of oars | Length of oars, feet | |||
| Over | Not over | Rowing | Steering | Rowing | Steering |
| --- | 15 | 4 | 1 | 8 | 9 |
| 15 | 19 | 6 | 1 | 10 | 11 |
| 19 | 21 | 6 | 1 | 11 | 12 |
| 21 | 23 | 6 | 1 | 12 | 13 |
| 23 | 25 | 8 | 1 | 13 | 14 |
| 25 | 27 | 8 | 1 | 14 | 15 |
Unexcelled design, performance and value our reputation for dependability
Full blade reinforcement, Tempered aluminum shafts run the full length of the blade in all oars to provide maximum strength and durability with minimum weigth. A.L. Don oars have excellent balance and will not warp or split under any conditions.
Full blade reinforcement, Tempered aluminum shafts run the full length of the blade in all oars to provide maximum strength and durability with minimum weigth. A.L. Don oars have excellent balance and will not warp or split under any conditions.








